762 Ratchet Lock Titanium Suppressor

762 Ratchet Lock Titanium Suppressor

762 Titanium Alpine Hunter Suppressor

762 Titanium Alpine Hunter Suppressor

762 Ratchet Lock Inconel Suppressor

The 762 Ratchet Lock Inconel Suppressor uses the latest flow technology for the best sound reduction in the least size.  Identical in design to the Titaniuim suppressor, the inconel is heavier but will supprort extended fireing schedules.  Designed for 300 BLK in both sub and supersonic as well as AR10.  The can will also perform well on 762x39, 6.5 Creedmoor, 6.5 Grendel, 6.8 SPC and 5.56.  The 762 RL attaches to a 90 tooth muzzle device (Not Included) using  two ratchets to provide 4 degree of rotational alignemnt. 

NZ$1,194.85
Availability: Out of stock
Only 0 left
SKU
762-RL-I
Write Your Own Review
You're reviewing:762 Ratchet Lock Inconel Suppressor

The 762 Ratchet Lock Inconel Suppressor uses the latest flow technology for the best sound reduction in the least size.  Identical in design to the Titaniuim suppressor, the inconel is heavier but will supprort extended fireing schedules.  Designed for 300 BLK in both sub and supersonic as well as AR10.  The can will also perform well on 762x39, 6.5 Creedmoor, 6.5 Grendel, 6.8 SPC and 5.56.  The 762 RL attaches to a 90 tooth muzzle device (Not Included) using  two ratchets to provide 4 degree of rotational alignemnt. 

For muzzle device options click here.

The suppressor mounts in about 3 seconds with 2 full turns of a ACME thread.  As the thread starts to tighten against the conical seal, the rotation rings clicks into place which prevents the can from unscrewing.  To remove, twist the rotation ring until it clicks which unlocks the ratchet and keep turning to unscrew the suppressor. The best feature about the lock ring is that the motion to install and remove is intuitve and effortless.  It also prevents ratchet clicking noises when installing since the ring keeps the ratchet disengaged from the teeth during normal operation.  If you want to hear the teeth, just put the ring in the locked position before installing.

Average multiple in house results of sound testing using BK2209 with BK4136 at 1 Meter left of muzzle and 1.6 meter high:

  • 12" AR 300 BLK Barrel using 208 grain subsonic at 1053 FPS: 124
  • 12" AR 300 BLK Barrel using 208 grain subsonic at 1046 FPS no suppressor: 158
  • 12" AR 300 BLK Barrel using 110 grain supersonic at 2256 FPS:  137
  • 12" AR 300 BLK Barrel using 110 grain supersonic at 2240 FPS no suppressor:  168
  • 20" Rem 700 Barrel using 147 grain SA at 2597 FPS:  139
  •  20" Rem 700 Barrel using 147 grain SA at 2584 FPS no suppressor:  168
  • 14.5" AR 15 using M193 55 grain at 2887 FPS: 138
  • 14.5" AR 15 using M193 55 grain  at 2846 FPS no suppressor: 167

This can is built from Inconel 718 using a selective laser melting process.  This process provides a completely monolithic structure for added strength with minimal weight.  The suppressor provides a yield strength of around 640 MPA with over 20 % elongation. 

These are designed for full auto on any 762x51, 762x39 and 300 BLK supersonic or 300 BLK subsonic.

Currently not available for sale in the USA.

More Information
Weight 295 grams
Overall Length 187mm
Overall Diameter 38.2mm
Internal Diameter NA
Thread Fits all RL muzzle devices in 762 or 556
Overbarrel from Shoulder NA
Length Past Muzzle 169mm Length past end of Muzzle device - 135mm