The 300 BLK / AR10 suppressor is updated with the latest cross flow design. Designed for 300 BLK in both sub and supersonic as well as AR10. The can will also perform well on the new NEA 762x39 upper and bolt rifles. The 762 - 300BLK / AR10 is a direct thread on suppressor that will thread over any standard 3/4" barrel that has 20mm from the shoulder unobstructed. It provides two points of contact to reduce the possibility of baffle strike on 3/4" barrels.
The can will perform much better on semiauto rifles with an adjustable gas block to reduce noise at the ejection port.
This can is designed for jacketed bullets only.
Preliminary in house results on sound testing:
11" AR 300 BLK Barrel using 208 grain subsonic at 1074 FPS: 123
11" AR 300 BLK Barrel using 125 grain supersonic at 2075 FPS: 135
20" Rem 700 Barrel using 147 grain SA at 2626 FPS: 139
This can is built from Ti6Al4V Grade 5 which is 90%Titanium, 6% aluminium and 4% Vanadium using a selective laser melting process. This process provides a completely monolithic structure for added strength with minimal weight. The suppressor is then stress relieved, heat treated and nitrided to provide a yield strength of around 1000 MPA and 1200 UTS. The internal structures have a 65 Rock C surface hardness due to the nitriding which drops back to 39 over the next 28 microns which increases the baffle longivity.
These are designed for semi auto use on any 762x51, 762x39 and 300 BLK supersonic or FA on 300 BLK subsonic.
Currently not available for sale in the USA.
|Thread||5/8" 24tpi RH|
|Overbarrel from Shoulder||20mm|
|Length Past Muzzle||166mm|